Overview - Dell Compatible 10GBASE-SR SFP+ Transceiver
This Dell compatible optical transceiver module is designed for multi-mode fiber and operates at a wavelength of 850 nm. It is compliant with Gigabit Ethernet and Fiber Channel standards making it ideally suited for 10G datacom and storage area network applications. This optical transceiver consists of two sections: the transmitter uses an 850 nm VCSEL laser and converts 10 Gbps serial PECL or CML electrical data into serial optical data, the PIN receiver converts 10 Gbps serial optical data into PECL or CML electrical data. In addition, digital diagnostic monitoring function is available via 2-wire interface.
Key Features - Dell Compatible 10GBASE-SR SFP+ Transceiver
- Operating data rate from 9.95 Gbps to 10.3 Gbps
- Hot-pluggable SFP+ footprint
- 1310 nm VCSEL laser transmitter
- Transmission distance up to 300 m over 50/125 μm MMF, and 300 m over 62.5/125 μm
- Duplex LC connector
- Low power dissipation
- Built-in digital diagnostic functions
- Electrical interface is compliant with SFF-8431
- Optical interface is compliant with IEEE802.3ae 10GBASE-SR/SW
- RoHS compliance
Application - Dell Compatible 10GBASE-SR SFP+ Transceiver
- 10GBASE-LR at 10.3125 Gbps
- 10GBASE-LW at 9.95 Gbps
- Other optical links
Technical Specifications - Dell Compatible 10GBASE-SR SFP+ Transceiver
Operating Data Rate
| 9.95 Gbps to 10.3125 Gbps
|
Wavelength
| 850 nm
|
Fiber Type
| MMF
|
Transceiver Form Factor
| SFP+
|
Connector Type
| LC
|
Distance
| 300 m over 50/125 μm MMF
300 m over 62.5/125 μm MMF
|
Power Supply
| 3.3 V
|
Operating Temperature
| 0 癈 to 70 癈 (Commercial), -40 癈 to 85 癈 (Industry)
|
