Overview - NETGEAR Compatible 1000Base-LX GBIC Optical Transceiver (AGM722F)
This hot-pluggable NETGEAR compatible GBIC transceiver is designed for single-mode fiber and operates at the wavelength of 1310 nm. It is compliant with GBIC interface converters specification Rev. 5.5 as well as Gigabit Ethernet standard as specified in IEEE 802.3. This optical transceiver consists of two sections: the transmitter section incorporates an advanced FP laser diode, and the receiver section uses an InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC. The optical output can be disabled by a TTL logic high-level input of Tx Disable. Tx Fault is provided to indicate degradation of the laser. Loss of signal (LOS) output is provided to indicate the loss of an input optical signal of receiver. In addition, a 20-pin connector is used to connect the converter to the host system.
Key Features - NETGEAR Compatible 1000Base-LX GBIC Optical Transceiver (AGM722F)
- Operating data rate up to 1.25 Gbps
- Compliant with IEEE 802.3z Gigabit Ethernet standard
- Compliant with Gigabit interface converter specification Rev. 5.5
- 1310 nm Fabry-Perot laser transmitter
- Duplex SC connector interface
- SCA-2 host connector
- Transmission distance up to 10 km
- RoHS Compliance
Applications - NETGEAR Compatible 1000Base-LX GBIC Optical Transceiver (AGM722F)
- WDM Gigabit Ethernet Links
- Fiber Channel Links
- SONET/SDH Equipment Interconnect
Technical Specifications - NETGEAR Compatible 1000Base-LX GBIC Optical Transceiver (AGM722F)
Maximum Data Rate
| 1.25 Gbps
|
Wavelength
| 1310 nm
|
Fiber Type
| SMF
|
Connector Type
| SC
|
Transmission Distance
| Up to 10 km
|
Power Supply
| 3.3 V/ 5 V
|
Operating Temperature
| -40 癈 to 85 癈
|
