Overview - NETGEAR Compatible 1000Base-SX GBIC Optical Transceiver (AGM 721F)
This hot-pluggable NETGEAR compatible GBIC transceiver operates at the wavelength of 850 nm and is designed for multi-mode fiber (MMF). It is compliant with GBIC interface converters specification Rev. 5.5 as well as Gigabit Ethernet standard as specified in IEEE 802.3z. This optical transceiver consists of two sections: the transmitter section incorporates a VCSEL laser, and the receiver section uses an InGaAs detector preamplifier (IDP) mounted in an optical header, and a limiting post-amplifier IC. The optical output can be disabled by a TTL logic high-level input of Tx Disable. Tx Fault is provided to indicate degradation of the laser. Loss of signal (LOS) output is provided to indicate the loss of an input optical signal of receiver. In addition, a 20-pin connector is used to connect the converter to the host system.
Key Features - NETGEAR Compatible 1000Base-SX GBIC Optical Transceiver (AGM 721F)
- Operating data rate up to 1.25 Gbps
- Compliant with IEEE 802.3z Gigabit Ethernet standard
- Compliant with Gigabit interface converter specification Rev. 5.5
- 850 nm VCSEL laser
- Duplex SC connector interface
- SCA-2 host connector
- Transmission distance up to 550 m
- RoHS Compliance
Applications - NETGEAR Compatible 1000Base-SX GBIC Optical Transceiver (AGM 721F)
- WDM Gigabit Ethernet Links
- Fiber Channel links
- SONET/SDH equipment interconnect
Technical Specifications - NETGEAR Compatible 1000Base-SX GBIC Optical Transceiver (AGM 721F)
Maximum Data Rate
| 1.25 Gbps
|
Wavelength
| 850 nm
|
Fiber Type
| MMF
|
Connector Type
| SC
|
Distance
| 550 m
|
Power Supply
| 3.3 V /5 V
|
Operating Temperature
| -40 癈 to 85 癈
|
