Overview - Force10 Compatible 1000Base-T Copper SFP Transceiver (GP-SFP2-1T)
This Force10 compatible copper SFP transceiver is compliant with SFP Multi-Source Agreement (MSA) specification and complies with the Gigabit Ethernet and 1000BASE-T standards as specified in IEEE Std. 802. 3. This hot pluggable copper SFP transceiver supports1000 Mbps full duplex data-links with 5-level Pulse Amplitude Modulation (PAM) signals. It has a transmission distance of up to 100 m over unshielded twisted pair (UTP) Category 5 Cable and provides standard serial ID information which can be accessed with address of A0h via the 2-wire serial CMOS EEPROM protocol. In addition, the physical laser IC can also be accessed via 2-wire serial bus at address ACh.
Key Features - Force10 Compatible 1000Base-T Copper SFP Transceiver (GP-SFP2-1T)
- Up to 1.25 Gbps bi-directional data links
- Hot pluggable
- 1000BASE-T operation in host systems with SGMII interface
- Fully metallic enclosure for low EMI
- Low power dissipation (1.05 W typical)
- RJ-45 connector
- Access to physical layer IC via 2-wire serial bus
- Compliant with IEEE 802.3TM-2002
- Compliant with SFP MSA
- RoHS Compliance
Applications - Force10 Compatible 1000Base-T Copper SFP Transceiver (GP-SFP2-1T)
- LAN 1000Base-T
- 1.25 Gigabit Ethernet over Cat 5 cable
- Switch to Switch interface
- Router to Router interface
Technical Specifications - Force10 Compatible 1000Base-T Copper SFP Transceiver (GP-SFP2-1T)
Data Rate
| 1.25 Gb/s
|
Connector
| RJ-45 connector
|
Transmission Distance
| Up to 100 m
|
Power Supply
| 3.3 V
|
Operating Temperature
| 0 癈 to 70 癈
|
