Overview – 60 MHz USB PC-Based Oscilloscope
This 60 MHz USB PC based oscilloscope is a high performance 8-bit, two-channel computer based USB digital storage oscilloscope. It combines the functions of an oscilloscope, spectrum analyzer, waveform recorder, signal generator, voltmeter and cymometer. The oscilloscope operates at up to 150 MS/s real-time sampling rate at a bandwidth of 60 MHz. It is commonly used for the maintenance of electronic equipment and laboratory work in fields such as science, medicine, engineering and telecommunications.
Key Features – 60 MHz USB PC-Based Oscilloscope
- USB2.0 interface, no external power source required
- Easy-to-carry and easy to use
- High performance, 150 MS/s real-time sampling rate, 60 MHz bandwidth
- 23 measurement functions, PASS/FAIL Check
- Waveform average, persistence, intensity, invert, addition, subtraction, multiplication, division, X-Y plot display
- FFT spectrum analysis
- Labview/VB/VC/Delphi/C++Builder Second Design Instance
Technical Specifications – 60 MHz USB PC-Based Oscilloscope
Channel
| 2 Channels
|
Impedance
| 1 MΩ 25 pF
|
Coupling
| AC/DC/GND
|
Vertical Resolution
| 8 Bit
|
Gain Range
| 10 mV to 5 V, 9 Steps
|
DC Accuracy
| ± 3 %
|
Timebase Range
| 4 ns to1 h, 38 Steps
|
Vertical Adjustable
| Yes
|
Input Protection
| Diode clamping
|
X-Y
| Yes
|
Auto Set
| Yes (30 Hz to 60 MHz)
|
EXT. Input
| DC 60 MHz
|
Trigger Mode
| Auto, Normal and Single
|
Trigger Slope
| +/-
|
Trigger Level Adjustable
| Yes
|
Trigger Type
| Rising edge, falling edge
|
Trigger Source
| CH1, CH2, EXT
|
Pre/Post trigger
| 0 % to100 %
|
Buffer Size
| 10 k to 32 kB/Channel
|
Shot Bandwidth
| DC 60 MHz
|
Max. Sample Rate
| 150 MS/s
|
Sampling Selection
| Yes
|
Waveform Display
| port/line, waveform average, persistence, intensity
|
Network
| Open/Close
|
Vertical Mode
| CH1, CH2, Dual, ADD
|
Cursor Measurement
| Yes
|
Spectrum Analyzer
|
Channel
| 2 Channels
|
Math
| FFT, addition, subtraction, multiplication, division
|
Bandwidth
| 60 MHz
|
Cursor
| Frequency, voltage
|
